http://WWW.REDWOPCHEMICAL.IN
REDWOPCHEMICALSPVTLTD 5835233f9ec66828dc461717 False 35032 30
OK
background image not found
Found results for
'e g loading bays'
REDOSEAL INR   0 INR  0
-NaN%

REDOSEAL

One Part Low Modulus Polyurethane Sealant REDOSEAL is an elastic, single component, gungrade, moisture curing polyurethane sealant specifically developed to be used in building facade expansion joints where high elasticity is required. The product is suitable for sealing joints in precast elements, external walling, curtain walling and cladding, panel walls, window and door perimeter sealing etc. Benefits One part, reduces the posibility of applicator error and possible joint failure Excellent thixotropy - non-sag Elastic low modulus Pitch-free - overpaintable Movement capability +/- 25% Bubble-free curing, no weak areas for air bubbles to develop Excellent resistance to weathering (DIN 14231) Very good adhesion to most construction materials especially concrete without the need of primer Permanently elastic over a wide range of temperatures

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
MAZIK COAT INR   0 INR  0
-NaN%

MAZIK COAT

MAZIK COAT system comprises of a single part water based acrylic emulsion sealer coat cum primer coat and a single part aliphatic acrylate, water based top coat. It gives resistance to aggressive agents, cracks, UV rays and rain, MAZIK COAT system is supplied in ready to use packs and available in a range of colours Uses MAZIK COAT system is suitable for use on all types of Structures which are directly exposed to sea, and to protect structures from attack by acid gases, chloride ions, sulphates, oxygen and water. The products is also suitable to protect other cementitious substrates and masonry. Benefits - Protects exposed reinforced concrete structures from atmospheric gases-excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water - It resists efflorescence and lime blooming with good adhesion on all cement plasters. It hides surface undulations and fine surface cracks. - UV resistant- aliphatic acrylate gives resistance to long term weathering. - It contains special glass fibers to maintain anti cracking properties.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
EPMORTAR ER INR   0 INR  0
-NaN%

EPMORTAR ER

Resin jointing and repair compound Uses: For fast and emergency resin statement of concrete. For bedding, jointing, profiling of concrete, repair of damaged concrete in precast units, jointing between precast units, repair of stair treads, fixing tiles, cladding, repairs to kerbs, man hole covers, door and window frames etc. Advantages  Durable - Stronger than concrete. Highly chemical and oil resistant. Excellent bond strength.  Ease of application - Mix resin and hardener in any proportion as required. No primer is required.  Quick - Finish job operation in 2 - 3 hours.  Versatile - Can be poured, trowelled, filled with coarse aggregates. Will cure in dry, wet, damp, and under water conditions. Can be used at down to 00C or upto 600C.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
RECLEANER INR   0 INR  0
-NaN%

RECLEANER

Rust remover, cleaning and etching agent Uses: RECLEANER is used as a rust remover from steel bars prior to encasing in concrete / micro concrete. It can also be used on other steel surfaces prior to coating with epoxy systems. Advantages  Rapid action: Safe with metals (except zinc and galvanized steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
POLYCOTE CWP INR   0 INR  0
-NaN%

POLYCOTE CWP

Crystalline capillary waterproofing system for cementitious substrates Uses Polycote CWP crystalline waterproofing system is used for waterproofing against the positive or negative sides of hydrostatic heads of water, for damp proofing, repairing cracks, plugging holes, sealing wall - floor joints and stopping active leaks in a wide variety of conditions including:  Sewage treatment and water treatment plants, tanks,foundations, tunnels and manholes.  Terrace garden, balconies, sunshades etc.  Roof and Sunken slabs  Industrial and office buildings  Reservoirs, water holding structures etc. Advantages  Meets the requirements as per ANSI/NSF Std61 forsuitability to potable water  Penetrates concrete, seals capillary tracts  Contains no chloride  Easy to apply  Resists chemical attack of sewage and industrial wastes  Suitable for external and internal applications.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
TERATILE PLATINUM INR   0 INR  0
-NaN%

TERATILE PLATINUM

Premium Grade tile adhesive for Exterior & Interior, Tile-on-tile, Tile-on-glass

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
INJECTOFIL INR   0 INR  0
-NaN%

INJECTOFIL

Low viscous epoxy injection grout Uses: INJECTOFIL is used for injecting into cracks, honeycombs and cavities in concrete structures. It can also be used for grouting base plates with very narrow gaps (<10mm). Advantages • Low viscosity - Can be injected into fine cavities and narrow gaps. • High mechanical strength - Performs even under heavy loads and stresses. • Excellent adhesive strength - Good bonding with substrate • Two part system - Easy to mix and handle • Non shrink - Complete filling of voids and cracks • Chemical resistant - Can be used in aggressive environments.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
TERATILE SILVER INR   0 INR  0
-NaN%

TERATILE SILVER

Ceramic tile adhesive suitable for exposure to damp and totally submerged conditions Uses: TERATILE SILVER a high quality adhesive for the permanent fixing of ceramic tiles for vertical and horizontal applications. It is also suitable for use in damp and totally submerged conditions, e.g. swimming pools. It can also be used for fixing of insulating and acoustic boards made of expanded polystyrene, etc. TERATILE SILVER tile adhesive is more suitable for internal applications. Advantages:  Non-shrink and waterproof  Can be used for areas subjected to totally submerged conditions and internal applications  Workable with open wet time of 20 mins. at 300C  Good slip resistance. High adhesive bond strength.  Early strength gain enables quick installation.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false